light touch switches/evqpp design and speci? cations are each subject to change without notice. ask factory for the current technical speci? cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. e 1 v 2 q 3456789 6th b, k d, m f, p h, r 7th a type operating force 1.6 n 2.4 n 1.6 n 2.4 n terminal shape j-bent straight height rate 0.1 8th & 9th 25 height 2.5 mm p a25 p japan 6.0 mm 3.5 mm square thin type light touc h switches for re ow sol der ing type: evqpp features 6.0 mm 3.5 mm square thin type: 2.5 mm in height excellent clear click feeling re? ow soldering available dustproof structure explanation of part numbers recommended applications operating signal input switches for portable cd players, md players, and communications equipment speci? cations type sn ap action / push-on type spst electrical rating 50 ma 12 vdc max. (res istive load) contact re sistance 100 m max. insulation resistance 100 m min. (at 100 vdc) dielectric with stand ing voltage 250 va c for 1 minute bouncing 10 ms max. (on, off) mechanical operatin g force 1.6 n 0. 5 n 2.4 n 0.6 n travel 0.25 mm +0.2 mm endurance op er at in g li fe 5 0000 cycles min. 30000 cycles min. operating te mperature 40 c to +85 c (45 % to 85 % rh) storage tem per a ture 40 c to +85 c (bulk) 20 c to +60 c (taping) minimum quantity/packing un it 4000 pcs. embossed taping (reel pack) qu an ti ty /c ar to n 2 0000 pcs. ?.1 jan. 2006
light touch switches/evqpp design and speci? cations are each subject to change without notice. ask factory for the current technical speci? cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. 3.7 2.6 1.2 0.8 0.2 2.5 0.2 7.6 6.0 4.2 2.6 a a b b 1.8 1.0 knob 1.8 circuit diagram 6.3 9.3 1.4 recommended land pattern 3.7 2.6 1.2 0.8 0.2 2.5 0.2 6.8 max. 6.0 4.2 2.6 a a b b 1.8 1.0 knob 1.8 circuit diagram 4.0 8.0 1.0 recommended land pattern dimensions in mm (not to scale) no. 1 part numb ers operating force height push plate color operating life ev qp pf a25 1.6 n 2.5 mm black 50000 cycles ev qp ph a25 2.4 n 2.5 mm white 30000 cycles part numb ers operating force height push plate color operating life ev qp pb a25 1.6 n 2.5 mm black 50000 cycles ev qp pd a25 2.4 n 2.5 mm white 30000 cycles no. 2 evq ppf evqpph (embossed taping) with straight terminals without ground terminal evqppb evqppd (embossed taping) with j-bent terminals without ground terminal nov. 2005
light touch switches/evqpp design and speci? cations are each subject to change without notice. ask factory for the current technical speci? cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. a b 6.3 4.7 1.4 circuit diagram recommended land pattern 2.7 3.0 5.3 ground ground 3.7 2.6 1.2 0.8 0.2 2.5 0.2 7.6 6.0 4.2 2.6 a b 1.8 1.0 knob 1.8 c 0.7 3.0 0.7 9.3 c 3.7 2.6 1.2 0.8 0.2 2.5 0.2 6.8 max. 6.0 4.2 2.6 a b 1.8 1.0 knob 1.8 4.0 4.7 1.0 circuit diagram recommended land pattern 2.7 3.0 5.3 ground ground a b c c 8.0 dimensions in mm (not to scale) no. 3 part numb ers operating force height push plate color operating life evqpppa25 1.6 n 2.5 mm black 5 0000 cycles evqppra25 2.4 n 2.5 mm white 3 0000 cycles part numb ers operating force height push plate color operating life ev qp pk a25 1.6 n 2.5 mm black 50000 cycles ev q ppm a25 2.4 n 2.5 mm white 30000 cycles no. 4 evq ppp evqppr (embossed taping) with straight terminals with ground term inal evqppk evqppm (embossed taping) with j-bent terminals with ground term inal nov. 2005
light touch switches/evqpp design and speci? cations are each subject to change without notice. ask factory for the current technical speci? cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. t w a b e c d r t p 2 p 0 p 1 t 2 t 1 f d 0 a b feeding hole chip component tape running direction chip pocket f w e tape width=12.0 mm 180 260 max. 150 230 90 30 40 10 (normal temp.) operation top ( c) soldering time (s) fan or normal temp. standard reel dimensions in mm (not to scale) recommended re? ow soldering conditions embossed carrier tap ing unit: mm part no. height abwfep 1 p 2 p 0 d 0 dia. t 1 t 2 evqpp 2.5 4.45 ?.20 8.3 max. 12.0 0.3 5.5 ?.1 1. 75 0.10 8.0 0.1 2.0 0.1 4.0 0.1 1.5 +0.1 0.30 0.05 2.55 0.20 ? item a b c d e rate (mm) f 370.0 2.0 f 5 0.0 min. f 13.0 0.5 f 21.0 1 .0 2.0 0.5 item w t t r rate (mm) 14.0 1.5 1 .0 to 3.0 1.0 0.5 jun. 2006
|
